FEATURED Black & Decker VEC1093DBD Smart Battery 40/20/10/4 Amp Battery Charger

• Spark-resistant design for added safety
• Reverse hook-up warning alarm to prevent damage to vehicle or electronics
• Features easy connectivity for battery clips and ring terminals or vehicle DC plug
• One year warranty
• Spark resistant reverse hook-up protection

The Black & Decker automatic Smart Battery charger is spark-resistant and features a reverse hook-up, overcharge protection, and solid state circuitry. It features three-stage, automatic, high-frequency charging technology for quick and easy charging.When your car battery goes dead, a jump-start is only a quick fix for the problem that may reoccur. The solution is to recharge the battery, using a product like the Black & Decker Smart Battery Charger. Fully Automatic Charging
The Smart Battery Charger is fully automatic and electronic, with a Digital Smart microprocessor control and an LED indicator for selecting your charging rate. The three stage automatic rapid charging operates at 40 amps, 20 amps, 10 amps, and 4 amps, with an average 5 minute engine start time and 4.5 hour full battery charge.

The Smart Battery Charger features 3-stage recharging technology. View larger.

This device also features a reverse hook-up warning alarm.

FEATURED Tenergy Universal Smart Charger for NiMH/NiCd Battery Packs (6V – 12V) Perfect for RC or Airsoft Battery Packs — NEW!

• Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 6V, 7.2V, 8.4V, 9.6V, 10.8V and 12V
• Smart Charger with automatic voltage detection
• Temperature sensor to protect battery pack from over heating
• Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack’s cycle life
• Red LED will be on during charging

Features and Benefits

* Universal for any NiMH /NiCd battery packs 6V – 12V (5-10 Cells Pack)
* Fast charger with current switch to select either 1A or 2A
* Charging Current 1A for battery packs with capacity from 1000mAh -1800mAh
* Charging Current 2A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is apprx. 1.5 hours
* Automatically charging ending with negative delta V
* Worldwide usage with 120-240V AC

Accessories Included

* 1 standard Tamiya connector with Temperature Sensor.
* 1 adapter from standard Tamiya to Mini Tamiya.
* 1 adapter from standard Tamiya to a pair of alligator clip.

Operation Instruction

* Connect battery pack to output connector and plug AC power source
* Make sure battery polarity is connected correctly (Red wire is positive)
* Charger will detect battery voltage automatically, Red LED will be on during charging
* When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be o